Deutsch
Description
BP Welder's Comfort welding jacket in soft, comfortable fabric with knitted inner cuffs to protect the hands. Meets welding protection class 2 for medium to heavy welding work. Stand-up collar, concealed snap placket, chest and side pockets, arm-lift system and reflective piping. EN ISO 11611 class 2-A1, EN ISO 11612, EN 1149-5.
- Material: 43% modacrylic, 33% cotton, 14% polyamide, 9% lyocell, 1% other
- Weight Gsm: 430
- Standard: EN ISO 11611 class 2-A1; EN ISO 11612 A1 B1 C1 E2 F1; EN 1149-5; IEC 61482-2 class 1
- Colour: anthracite / black
Manufacturer: BP · Article no. 2612
Trudy B. –
Comfortable, well cut, with plenty of pockets. The knee pockets are a bit tight for my chunkier pads, but the thin ones fit fine.
Torben S. –
Belt loops fit a proper tool belt, but the waist runs a bit large.
Marta C. –
They fit but the fabric is stiffer than I expected and took a good five or six washes to soften. I nearly sent them back. Now they feel fine, but be patient.
Niall B. –
Best work trousers I've had for scaffolding. Stretch panels behind the knee make climbing easy.
Andreas M. –
I fit air conditioning units on rooftops and need gear that doesn't restrict me on ladders. The rain suit is excellent for that, with a wide leg opening to fit over boots. The jacket has a little too much material in the hood, and it flaps in wind unless I cinch it. Once adjusted it kept me dry in heavy rain for four hours.
Mick S. –
Fair price for what you get. The fabric is solid and I like the tool pocket on the leg. Not quite as long as the description suggested, but wearable.
Klaus D. –
These trousers fit my thick thighs well thanks to the stretch. The seam thread is a brighter colour than I expected. Delivery took five days, a bit longer than promised, but they arrived undamaged.
Rosa G. –
Been wearing the rain trousers over my work trousers while cutting hedges in drizzle. They pull on over boots easily thanks to the leg zips, and the fabric does not rustle loudly like my old set.