Deutsch
Description
The H-Type 969 is a single-needle lockstitch cylinder arm machine built for extremely thick threads and materials, used for stitching nylon and polyester webbing, harness straps and load-bearing seams. It offers a stitch length of up to 15 mm, a presser foot lift of up to 30 mm and a large XL barrel shuttle hook with 70 percent more bobbin capacity. The cylinder arm gives 420 mm clearance in width and 225 mm in height, with a long-arm option of 1,000 mm. The integrated DA drive with DAC classic control and jog-dial needle positioning runs on 230 V.
Technical data
- Stitch Type: Lockstitch, single needle
- Max. Stitch Length: up to 15 mm
- Presser Foot Lift: up to 30 mm
- Arm Clearance: 420 x 225 mm (long arm 1,000 mm)
- Max. Speed: 1,000-1,250 stitches/min depending on variant
- Needle System: 794 / 1000H, Nm 120-300
- Thread: up to Nm 5/3
- Rated Power: 375 W, 1x230 V
Manufacturer: Dürkopp Adler · Model H-Type 969
Industrial machinery ships by freight. Delivery, installation and commissioning are quoted separately, please contact us before ordering.
Tommy S. –
Decent equipment, though I found the price of consumables such as reeds and needles high compared with what we used before. Support is fair and the machine performs, but budget for spares. Freight took ten days longer than promised.
Sofie J. –
Very predictable. Same width and same feel roll after roll. Our customers like the consistent feel.
Olga R. –
Solid stitching machine for harness assembly. Speed is good, and the operators like the foot control. Adjusting the presser foot height for different webbing thicknesses takes a moment, but it is straightforward.
Musa D. –
After eight months of steady use, no failures. The loom has needed only cleaning and lubrication, and weaving consistency is better than the older machine we replaced. Spare reeds cost more than I expected.